LongRifles, Inc.
Coyote Rifle (CR) Mod 0
An example of an early LRI CR Mod 0
2014 marked the year that LongRifles, Inc. and O'Neill Ops officially collaborated to bring cutting edge rifles for pro class coyote and hog hunters. With an annual harvest of over 100 coyotes, almost a million YouTube views and 10,000 subscribers (at the time), O'Neill Ops takes coyote hunting to a whole new level.
Our relationship began in December of 2012 with the development of "The Coyote Rifle"; a compact platform able to harvest dogs out to 400 yards with one shot kill capability. The caliber of choice was the Remington 22-250 loaded to a velocity of 3,600 feet per second using 50grain Hornady V-Max bullets. It makes for a flat shooting, lethal combination while observing the need to preserve fur.
Because O'Neill Ops films every hunt or "set", the system requirements for this gun demanded a compact unit as they pack a lot of gear in the field. James specified a max effective range of 400 yards for the rifle. Most shots on film however are from less than 200 yards. The reasons are simple; Even with the best video and photography equipment, a coyote often will resemble a house cat when filmed from extended distances.
The Coyote Rifle is a baseline platform. As with all the rifles we build, we tailor each job to individual needs. For the O'Neill project we chose the Bighorn Action made by A.J. Goddard in Brighton, CO fitted to a Muller-Works barrel. As with all LRI full builds, the stock began as an uninletted blank T5-A from Tom Manners, owner of Manner's Composite. These top shelf components made our job easy and the rifle delivers with sub 1/4 MOA accuracy on a broad diet of commercial and hand prepared ammunition. We have subsequently built many similar rifles each year for individuals with similar goals.
The LRI CR Mod 0 has become one of the most popular starting points for spec'ing a custom LRI build. We frequently build these variants on LRI blueprinted Remington 700 or American Rifle Company receivers, with K&P or Proof barrels. Most often they are built in a Manners T5A or EH5A stock, and fitted with a detachable AICS magazine, but they have also been built with hinged floorplates. Because each rifle we build is fully custom, the end result and budget will vary for each rifle, and each rifle will be tailored to the specific customer demand.
You can begin your own Coyote Rifle build by adding your choice of the products and services linked from this page to your cart and checking out. Final specifications for the build can be confirmed with us via email or phone.
Products commonly used to build a CR Mod 0 available from LRI
LRI Products
Qty
Cost
Tier One Blueprinted Remington M700 by LRI
Options:
Material: Stainless Steel, Handedness: Right, Length: Short Action, Bolt Face: .480", Time/TIG Bolt Handle
1
$780.00
K&P Barrel Company
Custom Match-Grade Barrel Blank
LRI Remington Varmint Contour
Options:
Stainless Steel, 22 Caliber, 1:8 Twist
Alternatives:
Proof Carbon
1
$ 334.99
Manners Composite Stock
Elite Tactical T5A Stock Blank
Options:
Carbon Fiber Shell, prepped for paint, no hardware installed
Alternatives:
T5, EH5A, EH5, T2, T2A, T4, T4A, T4AF, etc.
1
$ 425.00
Jewell Trigger
Options:
Safety: Top safety, Handedness: Right hand
1
$ 225.00
LRI Short Action M700 HTR DBM
Options:
No magazine
1
$ 249.00
LRI M700 Recoil Lug
Options:
Material: Carbon Steel, Profile: Factory
1
$ 49.99
LRI M700 SA 20 MOA Scope Rail
1
$ 75.00
LRI Mil Std 1913 Bipod Mount
1
$ 39.99
LRI Flush Cup
1
$ 29.99
LRI Heavy Duty Flush Cup
1
$ 25.00
Recoil Pad
1
$ 50.00
LRI 3.9 ULTACH Cheek Hardware
1
$ 169.99
LRI Custom Fitted Thread Protector
Options:
Thread Size: 5/8-24
1
$ 40.00
American Rifle Company Magazine
2
$ 168.00
Total:
$ 2,661.95
Services commonly required to build a CR Mod 0 available from LRI
LRI Services
Qty
Cost
Inlet and Pillar Bed Rifle Stock
Alternatives:
3D Surface Machined Inlet
1
$ 750.00
Barrel Fluting
Options:
Geometry: Faceted (Tool A), Pattern: Straight
1
$ 225.00
Install Flush Cup
1
$ 25.00
Install LRI Heavy Duty Flush Cup
1
$ 50.00
Install LRI 3.9 ULTACH System
Options:
Install into 2-piece stock
1
$ 100.00
Install LRI Quick Detach Bipod Mount
1
$ 35.00
Cross-pin stock
1
$ 75.00
Install Recoil Pad
Options:
Customer-specified length of pull
1
$ 75.00
Prep, Prime, Texture, and Cerakote Stock
Options:
Colors: 4, Pattern: LRI Halo
1
$ 450.00
Cerakote All Metal (Full Builds Only)
Options:
1
$ 400.00
Barrel Fitting
Options:
Chamber: 22-250, Receiver Type: Push Feed/Short Action
1
$ 325.00
Thread Muzzle
Options:
Thread Size: 5/8-24
1
$ 100.00
Enlarge M700 Scope Base Holes to 8-40
Options:
With Blueprinting
1
$ 75.00
Drill M700 Receiver for Pinned Recoil Lug
1
$ 65.00
Total:
$ 2,750.00
| LRI Products | Qty | Cost |
|---|---|---|
|
Tier One Blueprinted Remington M700 by LRI
Options: Material: Stainless Steel, Handedness: Right, Length: Short Action, Bolt Face: .480", Time/TIG Bolt Handle |
1 | $780.00 |
|
K&P Barrel Company Custom Match-Grade Barrel Blank LRI Remington Varmint Contour Options: Stainless Steel, 22 Caliber, 1:8 Twist Alternatives: Proof Carbon |
1 | $ 334.99 |
|
Manners Composite Stock Elite Tactical T5A Stock Blank Options: Carbon Fiber Shell, prepped for paint, no hardware installed Alternatives: T5, EH5A, EH5, T2, T2A, T4, T4A, T4AF, etc. |
1 | $ 425.00 |
|
Jewell Trigger
Options: Safety: Top safety, Handedness: Right hand |
1 | $ 225.00 |
|
LRI Short Action M700 HTR DBM
Options: No magazine |
1 | $ 249.00 |
|
LRI M700 Recoil Lug
Options: Material: Carbon Steel, Profile: Factory |
1 | $ 49.99 |
| LRI M700 SA 20 MOA Scope Rail | 1 | $ 75.00 |
| LRI Mil Std 1913 Bipod Mount | 1 | $ 39.99 |
| LRI Flush Cup | 1 | $ 29.99 |
| LRI Heavy Duty Flush Cup | 1 | $ 25.00 |
| Recoil Pad | 1 | $ 50.00 |
| LRI 3.9 ULTACH Cheek Hardware | 1 | $ 169.99 |
|
LRI Custom Fitted Thread Protector
Options: Thread Size: 5/8-24 |
1 | $ 40.00 |
| American Rifle Company Magazine | 2 | $ 168.00 |
| Total: | $ 2,661.95 |
| LRI Services | Qty | Cost |
|---|---|---|
|
Inlet and Pillar Bed Rifle Stock
Alternatives: 3D Surface Machined Inlet |
1 | $ 750.00 |
|
Barrel Fluting
Options: Geometry: Faceted (Tool A), Pattern: Straight |
1 | $ 225.00 |
| Install Flush Cup | 1 | $ 25.00 |
| Install LRI Heavy Duty Flush Cup | 1 | $ 50.00 |
|
Install LRI 3.9 ULTACH System
Options: Install into 2-piece stock |
1 | $ 100.00 |
| Install LRI Quick Detach Bipod Mount | 1 | $ 35.00 |
| Cross-pin stock | 1 | $ 75.00 |
|
Install Recoil Pad
Options: Customer-specified length of pull |
1 | $ 75.00 |
|
Prep, Prime, Texture, and Cerakote Stock
Options: Colors: 4, Pattern: LRI Halo |
1 | $ 450.00 |
|
Cerakote All Metal (Full Builds Only)
Options: |
1 | $ 400.00 |
|
Barrel Fitting
Options: Chamber: 22-250, Receiver Type: Push Feed/Short Action |
1 | $ 325.00 |
|
Thread Muzzle
Options: Thread Size: 5/8-24 |
1 | $ 100.00 |
|
Enlarge M700 Scope Base Holes to 8-40
Options: With Blueprinting |
1 | $ 75.00 |
| Drill M700 Receiver for Pinned Recoil Lug | 1 | $ 65.00 |
| Total: | $ 2,750.00 |
Total Rifle Cost: Approximately $5,411.95 plus applicable tax and shipping.
Get started on the LRI Web Store by following the links above to learn about our process!